- Conference Venue
- The PASREG 2017 will be held at the Shibaura Institute of Technology.
- Website: http://www.shibaura-it.ac.jp/en/
- Address and Contact Information
- Shibaura Institute of Technology (SIT)
- 3-7-5, Toyosu, Koto-ku
- Tokyo 135-8548, JAPAN
- Phone: +81-3-5859-2418
- Fax: +81-3-5859-7311
- PASREG 2017
- The 10th International Workshop on Processing and Applications of Superconducting (RE)BCO Large Grain Materials (PASREG 2017) will be held in Tokyo (Japan) on December 11-12, 2017.
-
- PASREG 2017 is the tenth in the series of international workshops on the processing and applications of large grain (RE)BCO superconducting materials, intended to bring together scientists active in the field, to enable them exchange ideas and experience in the field, to present achievements on a representative forum, and to co-ordinate further activities. The previous workshops were held in Cambridge, UK. (1997), Morioka, Japan (1999), Seattle, USA (2001), Jena, Germany (2003), Tokyo, Japan (2005), Cambridge, UK (2007), Washington D.C., USA (2010), Tainan, Taiwan (2012), and Liege, Belgium (2015).
- We are looking forward to meeting you in Tokyo, Japan in December 2017!
- Scope:
- The PASREG 2017 workshop will be open for all important aspects of processing and characterization of bulk high temperature superconductors (HTS) and other bulk superconducting materials (including MgB2 and pnictides). The workshop will also highlight materials processing, innovative applications utilizing bulk HTS materials, and recent development in the field. The programme will consist of invited, contributed oral and poster presentations in material science and engineering.
- PASREG 2017 topics:
- Processing of bulk HTS (e.g. (RE)BCO, BiSCCO) and other bulk superconductors (MgB2, pnictides, etc.)
- Characterization of bulk superconductors, including levitation properties
- Magnetization and activation techniques
- Optimization of critical currents, flux pinning, grain size, strength of materials, etc.,
- Bulk-type hybrid and composite materials
- Applications of bulk superconducting materials, including trapped field magnets, motors and generators, levitation, flyweel storage, magnetic shielding, fault current limiters, innovative applications (e.g. biomedical etc.,)
- Organisation:
- Chairs:
- Prof. Dr. Masato Murakami, SIT, Tokyo
- Prof. Dr. Miryala Muralidhar, SIT, Tokyo
- National organization Committee:
- Prof. Dr. Masato Murakami, SIT
- Prof. Dr. Muralidhar Miryala, SIT
- Prof. Dr. Naomichi Sakai, SIT
- Prof. Dr. Tetsuo Oka, Niigata Univ.
- Prof. Dr. Mitsuru Izumi, TUMSAT
- Prof. Dr. Hiroyuki Fujishiro, Iwate Univ.
- Prof. Dr. Jun-ichi Shimoyama, Aoyama Gakuin Univ.
- Prof. Dr. Ken Nagashima, RTRI
- Prof. Dr. Noriko Chikumoto, Chubu Univ.
- Prof. Dr. K. Iida, Nagoya Univ.
- Prof. Dr. Kazuo Inoue, SIT
- Prof. Dr. Yamamoto Ayako, SIT
- Program Committee:
- Prof. Dr. Muralidhar Miryala, SIT
- Prof. Dr. Naomichi Sakai, SIT
- Prof. Dr. Tetsuo Oka, Niigata Univ.
- Prof. Dr. John Durrell, Cambridge, UK
- Prof. Dr. A. Koblishka-Veneva, Saarland Univ. Germany
- Prof. Dr. H. Ikuta, Nagoya Univ.
- Prof. Dr. Mitsuru Izumi, TUMSAT
- Prof. Dr. Noriko Chikumoto, Chubu Univ.
- Prof. Dr. Kazuya Yokohama, Ashikaga Institute of Technology
- Prof. Dr. Tomoyuki Naito, Iwate Univ.
- Prof. Dr. Jun Ogawa, Niigata Univ.
- Prof. Dr. Satoshi Fukui, Niigata Univ.
- Prof. Dr. M. Miki, TUMSAT
- Prof. Dr. Shinya Nariki, Nippon Steel
- International Advisory Committee:
- Prof. Dr. A. Campbell, Cambridge Univ., UK
- Prof. Dr. R. Weinstein, Univ. of Houston, USA
- Prof. H. C. Freyhardt, University Goettingen, Germany
- Prof. Dr. D. A. Cardwell, Cambridge Univ., UK
- Prof. Dr. In-Gann Chen, National Cheng Kung Univ., Taiwan
- Dr. Mike Strasik, Boeing Research & Technology, USA
- Prof. Dr. Ph. Vanderheyden, University of Liege, Belgium
- Prof. Dr. P. Diko, Slovak Academy of Sciences, Slovak Republic
- Dr. M. Jirsa, Czech Academy of Sciences, Czech Republic
- Prof. Dr. Y. Zhao, Southwest Jiaotong Univ., China
- Prof. Dr. C. J. Kim, Korea Atomic Energy Research Institute, South Korea
- Prof. Dr. J. G. Noudem, CRISMAT-ENSICAEN, France
- Prof. Dr. T. Prikhna, ISMNASU, Ukraine
- Prof. Dr. Xin Yao, Shanghai Jiao Tong Univ., China
- Prof. Dr. M. R. Koblischka, Saarland Univ., Germany
- Prof. Dr. S-I. Yoo, Seoul National Univ., Korea
- Prof. Dr. M. Eisterer, Atom Institute Wienna, Austria
- Prof. Dr. F. N. Werfel, ATZ, Germany
- Important Dates and Deadlines:
- Abstract Submission Deadline: October 10, 2017
- Registration Opens: September 15, 2017
- Notification of Abstract Acceptance: October 12, 2017
- Final program announced: December 1, 2017
- PASREG 2017 Conference: December 11-12, 2017
- Call for abstracts:
- You are kindly invited to submit abstracts for oral presentations or posters at the workshop in the following topics:
- Processing of bulk HTS (e.g. (RE)BCO, BiSCCO) and other bulk superconductors (MgB2, pnictides, etc.)
- Characterization of bulk superconductors, including levitation properties
- Magnetization and activation techniques
- Optimization of critical currents, flux pinning, grain size, strength of materials, etc.,
- Bulk-type hybrid and composite materials
- Applications of bulk superconducting materials, including
- Trapped field magnets
- Motors and generators
- Levitation
- Flyweel storage
- Magnetic shielding
- Fault current limiters
- Innovative applications (e.g. biomedical etc.,)
- Abstracts: The prospective participants in the workshop are invited to submit an abstract of 300 - 500 words to the address below, not later than October 10, 2017. The complete abstract should include the title (capitalized and centered), authors names (initial and full last name; underline the presenting author), affiliation, mailing addresses (including e-mail address). The abstract is preferably sent by e-mail as an attached file in the MS-Word format.
- Chairs PASREG 2017
- Shibaura Institute of Technology
- 3-7-5, Toyosu, Koto-ku
- Tokyo 135-8548, JAPAN
- Tel & fax +81-3-5859-8117
- e-mail: pasreg2017@sic.shibaura-it.ac.jp
|